Fargo

HDP5000

  • Sided Printing: Single or Dual
  • Print Method: HDP Dye-Sublimation / Resin Thermal Transfer
  • Resolution: 300 dpi
  • Print Speed: 26 seconds per card / 138 cards per hour (YMC with transfer)
  • Accepted Card Sizes:
    • CR-80
  • Printer Options:
    • Card Lamination Module – single-sided or dual-sided (simultaneous) – Upgradable
    • Smart card encoding (contact/contactless) – Upgradable
    • Door and cartridge locks
    • Printer cleaning kit
    • Magnetic stripe encoding – Upgradable
    • 200-card input hopper – Upgradable
    • Dual-sided printing – Upgradable

Single Wire Ethernet and USB 2.0 interface for in-line printing and encoding (note: single wire Ethernet encoding is only available for iCLASS and contact smart card encoding)
   
   
   
   
Persona® C30e ID System
 Print Method: Dye-Sublimation / Resin Thermal TransferResolution: 300 dpi (11.8 dots/mm) continuous tone

Colors: Up to 16.7 million / 256 shades per pixel

Print Ribbon Options:

• Full-color with resin black and overlay panel, YMCKO*, 250 prints

• Full-color with two resin black panels and overlay panel, YMCKOK*, 200 prints

• Resin black and overlay panel, KO, 500 prints

• Dye-sublimation black and overlay panel, BO*, 500 prints

• Resin black, green, blue, red, white, 1,000 prints; silver and gold, 500 prints

Print Speed:*

• 7 seconds per card (K)*

• 12 seconds per card (KO)*

• 27 seconds per card (YMCKO)*

• 35 seconds per card (YMCKOK)*

Accepted Standard Card Sizes: • CR-80 (3.375″L x 2.125″W / 85.6mmL x 54mmW)

• CR-79 Adhesive Back (3.313″L x 2.063″W / 84.1mmL x 52.4mmW)

Print Area: • CR-80 edge-to-edge (3.36″L x 2.11″W / 85.3mmL x 53.7mmW)

• CR-79 (3.3″L x 2.04″W / 83.8mmL x 51.8mmW)

Accepted Card Thickness: .009″ – .040″ / 9 mil – 40 mil / .229mm – 1.016mm

Accepted Card Types: PVC or polyester cards with polished PVC fi nish; monochrome resin required for100% polyester cards; optical memory cards with PVC fi nish

Card Cleaning: Card cleaning roller integrated into ribbon cartridge; cleaning roller is automatically replaced with each ribbon change

Memory: 2MB RAM

Operating Temperature: 65° to 80° F / 18° to 27° C

Humidity: 20–80% non-condensing

Dimensions: • Single-Sided: 7.9″H x 13.62″W x 8.14″D / 201mmH x 346mmW x 207mmD

• Dual-Sided: 7.9″H x 18.28″W x 8.14″D / 201mmH x 464mmW x 207mmD

Supply Voltage: 100-240 VAC, 3.3 A

Supply Frequency: 50 Hz / 60 Hz

Warranty: • Printer – Two years

• Printhead – Two years, unlimited pass with UltraCard™ Cards

Encoding Options:

• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2, and 3

• Contact Smart Card Docking Station

• Contactless Smart Card Encoder (HID® iCLASS®, MIFARE® and MIFARE DESFire)

• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor

smart cards (T = 0, T = 1) as well as synchronous cards

• Prox Card Reader (HID read-only)

Options:

• Dual-sided Printing Module – Field-upgradeable

• Magnetic Stripe Encoding Module – Field-upgradeable

• Smart Card Encoding Modules – Field-upgradeable by technician

• Printer cleaning kit

• Ethernet networking with internal print server (replaces USB connection)